Copol Classic

Choose your language

Thank you for visited us!

Ready to take the first step towards unlocking opportunity realizing goals, and embracing innovation?

View On Google Map

Any Question +389 70 383 615

CATEGORY: INTERIOR COLORS

01

Application

It is suitable for painting all types of dry and hard surfaces: finely plastered vertical and ceiling surfaces, concrete, fiber-cement surfaces and plasterboard boards. COPOL can be tinted with tinting pigments. The surface must be: dry, load-bearing, clean and free of weakly bonded parts, dust, water soluble salts, grease and other impurities. The old paint, which is not well bound, is mechanically removed. Uneven surfaces should be leveled with one of the tables for smoothing interior walls. Before painting, the surface should be impregnated with a suitable CO-PRIMER substrate, depending on the condition of the surface.
02

Preparation

COPOL is applied by brush, roller or spray machine, in two covering layers. For the first layer, COPOL ot can be diluted with water up to 40%, while for the second layer it can be diluted up to 25%. The second layer is applied after 6 hours, ie on the previously dried coating. After use, the tool should be washed immediately with water.
03

Consumption

125-200ml/m? in two layers, depending on the roughness and absorbency of the surface.
04

Packaging

COPOL IS AN ECOLOGICAL PRODUCT. IT MUST NOT FREEZE!
05

Storage

To be stored in the original, well-closed and undamaged packaging, at a temperature of +5°C to +25°C, protected from direct sunlight.
06

Capacity

25kg